Sony HT-9900M Operating Instructions - Page 92
Settings for the Speakers (SPEAKER SETUP), SPEAKER SETUP
View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
• 48kHz/96kHz PCM (DVD VIDEO only) Selects the sampling frequency of the audio signal. 48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit. 96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit. Notes • Even if you set "48kHz/96kHz PCM" to "96kHz/ 24bit," the sampling frequency is converted to 48kHz/16bit when a "SURROUND" mode (page 69) is selected. • The analog audio signals from the LINE OUT AUDIO L/R jacks and 5.1CH OUTPUT jacks are not affected by this setting and keep their original sampling frequency level. Settings for the Speakers (SPEAKER SETUP) To obtain the best possible surround sound, input the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and balance of the speakers to the same level. This setting is effective when connecting a speaker with 5.1 CH OUTPUT jacks (page 26). Select "SPEAKER SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 85). The default settings are underlined. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: LARGE LARGE LARGE(REAR) YES To return to the default setting Select the item, then press CLEAR. Note that only the "SIZE" setting does not return to the default setting. ◆ SIZE Selects the size of the speakers. • FRONT LARGE Normally select this position. SMALL Select this when the speaker cannot reproduce adequate bass frequencies. • CENTER LARGE SMALL NONE Normally select this position. Select this when the speaker cannot reproduce adequate bass frequencies. Select this if you do not connect a center speaker. 92