Sony HT-9900M Operating Instructions - Page 90
Settings for the Sound (AUDIO SETUP), CD DIRECT, AUDIO ATT attenuation
View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Notes • When you set the item to "AUTO," the language may change. The "TRACK SELECTION" setting has higher priority than the "AUDIO" settings in "LANGUAGE SETUP" (page 86). • If PCM, DTS, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, and Dolby Digital sound tracks in this order. ◆ CD DIRECT Eliminates the use of unnecessary circuits when playing CDs. This setting will be activated when you open or close the front cover. This function affects the output from the following jacks: - LINE OUT AUDIO L/R 1/2 jacks - 5.1CH OUTPUT jacks OFF ON Select this when playing CD discs, including CDs with DTS tracks. Eliminates the use of unnecessary circuits when playing CDs. Note If you select "ON" when playing CDs with DTS tracks, the sound will become noisy. Settings for the Sound (AUDIO SETUP) "AUDIO SETUP" allows you to set the sound according to the playback and connection conditions. Select "AUDIO SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 85). The default settings are underlined. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD AUDIO FILTER: SHARP DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: D-PCM 48kHz/96kHz PCM: 48kHz/16bit ◆ AUDIO ATT (attenuation) If the playback sound is distorted, set this item to "ON." The player reduces the audio output level. This function affects the output of the following jacks: - LINE OUT AUDIO L/R 1/2 jacks - 5.1CH OUTPUT jacks OFF Normally, select this position. ON Select this when the playback sound from the speakers is distorted. ◆ AUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-RW only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "AUDIO DRC." This affects the output from the following jacks: - LINE OUT AUDIO L/R 1/2 jacks - 5.1CH OUTPUT jacks - DIGITAL OUT (COAXIAL or OPTICAL) jack only when "DOLBY DIGITAL" is set to "D-PCM" (page 91). STANDARD Normally select this position. TV MODE Makes low sounds clear even if you turn the volume down. WIDE RANGE Gives you the feeling of being at a live performance. 90