Sony HT-9900M Operating Instructions - Page 94

Adjusting the speaker volume, and level, Select TEST TONE and set to ON.

Get Sony HT-9900M - Dvd Home Theater PDF manuals and user guides View all Sony HT-9900M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

◆ BALANCE Varies the balance of the left and right speakers. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. FRONT (0 dB) Set this between -6 dB [L] and +6 dB [R] (0.5 dB increments). REAR (0 dB) Set this between -6 dB [L] and +6 dB [R] (0.5 dB increments). ◆ LEVEL Varies the level of each speaker. Be sure to set "TEST TONE" to "ON" for easy adjustment. The default adjustments are in parentheses. FRONT (0 dB) Set this between -6 dB and 0 dB (0.5 dB increments). CENTER (0 dB) Set this between -12 dB and 0 dB (0.5 dB increments). REAR (0 dB) Set this between -12 dB and 0 dB (0.5 dB increments). SUBWOOFER Set this between -10 dB and (0 dB) +10 dB (0.5 dB increments). Adjusting the speaker volume and level 1 Select "SPEAKER SETUP" in the Setup Display. 2 Select "TEST TONE" and set to "ON." You will hear the test tone from each speaker in sequence. 3 From your listening position, select "BALANCE" or "LEVEL" and adjust the value of "BALANCE" using C/c and "LEVEL" using X/x. The test tone is emitted from both left and right speakers simultaneously. 4 Select "TEST TONE" and set to "OFF" to turn off the test tone. Note The test tone signals are not output from the digital jack. To adjust the volume of all the speakers at one time Use the amplifier's (receiver's) volume control. ◆ TEST TONE The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust "BALANCE" and "LEVEL." OFF The test tone is not emitted from the speakers. ON The test tone is emitted from each speaker in sequence. 94

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
94
◆
BALANCE
Varies the balance of the left and right
speakers. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
The default adjustments are in parentheses.
◆
LEVEL
Varies the level of each speaker. Be sure to
set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at
one time
Use the amplifier’s (receiver’s) volume
control.
◆
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust “BALANCE” and “LEVEL.”
Adjusting the speaker volume
and level
1
Select “SPEAKER SETUP” in the Setup
Display.
2
Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
“BALANCE” or “LEVEL” and adjust the
value of “BALANCE” using
C
/
c
and
“LEVEL” using
X
/
x
.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select “TEST TONE” and set to “OFF”
to turn off the test tone.
Note
The test tone signals are not output from the digital
jack.
FRONT
(0 dB)
Set this between –6 dB [L] and
+6 dB [R] (0.5 dB increments).
REAR
(0 dB)
Set this between –6 dB [L] and
+6 dB [R] (0.5 dB increments).
FRONT (0 dB)
Set this between –6 dB and 0
dB (0.5 dB increments).
CENTER
(0 dB)
Set this between –12 dB and
0 dB (0.5 dB increments).
REAR (0 dB)
Set this between –12 dB and
0 dB (0.5 dB increments).
SUBWOOFER
(0 dB)
Set this between –10 dB and
+10 dB (0.5 dB increments).
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence.