Sony PEGA-WL100 Operating Instructions - Page 14

Performing Communications via a Wireless LAN Access Point (Infrastructure Mode) You can wirelessly access the Internet or perform communications with other communication device through a wireless LAN access point. Basic Settings Before setting You first need to input a couple of values to set the wireless LAN access point you use. Check the following values in advance. [NetworkID (SSID)]: It is also called ESS-ID or Network Name. [WEP (Wired Equivalent Privacy)]: It is also called Encryption. For details, ask your System Administrator. When you have a wireless LAN access point for your personal use, refer to the operating instructions of the wireless LAN access point. Note The Wireless LAN card uses the 1-11 channels (2.4 GHz band of frequencies). If your access point uses the 12-14 channels, it is impossible to perform communications using the Wireless LAN card. 1 Insert the Wireless LAN card in Wireless Communication Slot of your CLIÉ handheld. 2 Tap the [Prefs] icon on the home screen of your CLIÉ handheld. The [Preferences] screen appears. 3 Tap V in the upper right corner of the screen, and select [Network]. The [Network] screen appears. 14