Sony VPL AW15 Operating Instructions - Page 56
Close the lamp cover, then, tighten the 3 screws. - air filter
UPC - 027242703094
View all Sony VPL AW15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 Loosen the three screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. 6 Close the lamp cover, then tighten the screws. 5 Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws. Note If the lamp cover is not set securely, the power will not turn on. 7 Remove the air filter cover. Notes • Be careful not to touch the optical block inside the unit. • If the 3 screws are not tightened securely, the lamp cover will not close. 8 Remove the air filter. 56
56
4
Loosen the three screws on the
lamp with the Phillips
screwdriver. Hold up the handle,
then pull the lamp straight out.
5
Hold the handle of the new lamp
and push it in securely until it
reaches the end, and then
tighten the 3 screws.
•
Be careful not to touch the optical block
inside the unit.
•
If the 3 screws are not tightened
securely, the lamp cover will not close.
6
Close the lamp cover, then
tighten the screws.
If the lamp cover is not set securely, the power
will not turn on.
7
Remove the air filter cover.
8
Remove the air filter.
Notes
Note