Sony VPL AW15 Operating Instructions - Page 57
Select OK. - filters
UPC - 027242703094
View all Sony VPL AW15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
9 Place a new air filter. 13 Turn on the projector, then select the desired setting item on the Setup menu. The menu screen below will be appeared. Others Note After removing the air filter, do not touch the fan inside the projector. 10 Attach the air filter cover. 11 Wipe dust off the Ventilation holes (intake) with a soft cloth. Ventilation holes (intake) Note The projector will not turn on unless the air filter cover is securely closed. 12 Place the project back on its original position. 14 Select "Yes". 15 Select "OK". Caution Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire. Notes • Be sure to use an LMP-H160 Projector Lamp for replacement. If you use lamps other than the LMP-H160, the projector may malfunction. • Be sure to turn off the projector and unplug the power cord before replacing the lamp, then check the ?/1 (On/standby) indicator has already been turned off. • The projector will not turn on unless the lamp is securely installed in place. • The projector will not turn on unless the lamp cover are securely closed. • To cancel a message displayed on the screen, press either the button on the remote control or the one on the control panel on the projector. Note The lamp contains mercury. The disposal rules for used fluorescent tubes depend on where you live. Follow the waste disposal policy in your area. 57