Symphonic CSC313E Owner's Manual - Page 14
To Change Clock Setting, Automatic Clock Setting
View all Symphonic CSC313E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
6 Select the hour Press [PLAY/K] or [STOP/L] until your desired hour appears. (Example: "5", "PM") Then press [F.FWD/ B]. - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 5 THU 2 0 0 5 HOUR MINUTE 0 5 : - - PM 1 Select "SETTING CLOCK" Press [MENU]. Press [PLAY/K] or [STOP/L] to select "SETTING CLOCK", then press [F.FWD/ B]. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 7 Select the minute Press [PLAY/K] or [STOP/L] until the desired minute appears. (Example: "40") - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 5 THU 2 0 0 5 HOUR MINUTE 0 5 : 4 0 PM 2 Set "AUTO CLOCK" to [ON] Press [F.FWD/ B] until "AUTO CLOCK [ON]" appears. - SETTING CLOCK - B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] 8 Start the clock Press [MENU]. 5:40 PM Although seconds are not displayed, they begin counting from 00 when you press [MENU]. Use this feature to synchronize the clock with the correct time. NOTE: • When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. 3 Begin "AUTO CLOCK CH SEARCH" Press [STOP/L] to select "AUTO - SETTING CLOCK - CLOCK CH SEARCH". Then press [F.FWD/ B]. • The unit begins searching for the station which contains the auto AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] clock set signal. The search for a signal may take up to 20 seconds per channel. • When the search has ended, "_ _" - AUTO CLOCK CH SEARCH - appears at the lower left of the 08 10 13 screen. • Write down the number(s) that _ _ appear on the screen. They are TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps 1 to 2 on page 13. 2)Select the item you want to change using [REW/s] or [F.FWD/ B]. 3)Enter correct numbers using [PLAY/K] or [STOP/L]. the auto clock station(s) in your area. • If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 13. Press [MENU] to exit the screen. 4)Press [MENU] to start the clock. NOTE: • If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and NOTE: • During AUTO CLOCK CH SEARCH, the picture may be distorted. press [REW/s] or [F.FWD/ B] to turn [OFF] this function. Then you can manually adjust the clock. 4 Enter the channel number that contains the Automatic Clock Setting Signal AUTOMATIC CLOCK SETTING Make sure ... • The unit must be turned on. • Confirm the unit is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. jack on the rear of the unit. NOTES: Follow step 1 above to select "SETTING CLOCK" menu. Press [STOP/L] to select "AUTO - SETTING CLOCK - CLOCK CH". Press [REW/s] or [F.FWD/ B] AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [ 45 ] until you locate Auto Clock Set station number that you wrote MANUAL CLOCK SET D.S.T. [OFF] down at step 3. • If a cable converter box is being used, make sure it is powered on. • You must use the remote control to perform the clock setting procedure. • If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be Press [MENU] to exit the screen. 5 Turn off the unit Once the unit is turned off, it will periodically check and set the correct date and time. selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. - 14 - EN