Symphonic SR90VE Owner's Manual - Page 38

Recording Settings for an external source (cont'd) Recording from an external source DVD-R Video DVD-RW VR DVD-RW VCR Before recording from an external source, see the instruction for the connection on page 37. 1. Turn the TV and the unit on, and be sure to select the input of the TV to which the unit is connected. DVD 2. When you want to record to the disc: Press: Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. 4 1 POWER REC SPEED AUDIO OPEN/CLOSE .@/: 1 GHI 4 PQRS 7 ABC 2 JKL 5 TUV 8 SPACE 0 DEF 3 MNO CH 6 WXYZ VIDEO/TV 9 SLOW This operation may take a while to be recognized. DISPLAY VCR DVD PAUSE 2 3 VCR PLAY When you want to record to the tape: Press: STOP Insert the tape with a safety tab into the cassette compartment. 5 REC/OTR SETUP TIMER PROG. REC MONITOR ENTER 7 3. Select the input of the unit to which the external equipment is connected. (L2 or L1) •To use the input jacks on the back of this unit, select "L1" position by pressing [0],[0],[1] on the remote control or the CH K / L buttons. MENU/LIST TOP MENU RETURN CLEAR/C-RESET ZOOM SKIP SEARCH MODE CM SKIP SKIP •To use the input jacks on the front of this unit, select "L2" position by pressing [0],[0],[2] on the remote control or the CH K / L buttons. 4. Select a recording speed using REC SPEED button. Refer to "Recording speed" on page 26 for DVD or page 94 for VCR. XP SP LP SEP SLP EP DVD mode SP SLP VCR mode 5. Press REC/OTR button on the unit to start recording. 6. Press PLAY button on the external source to record from. 7. For disc: Press STOP Cbutton on the unit to stop recording. This operation may take a while to be completed. For tape: Press STOP/EJECT C A button on the unit to stop recording. 38