TP-Link TL-WR842ND TL-WR842ND V1 User Guide - Page 13
The Rear Panel - usb printer
View all TP-Link TL-WR842ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TL-WR842ND 300Mbps Multi-Function Wireless N Router ) Note: After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off. 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR842ND 300Mbps Multi-Function Wireless N Router. ¾ WAN: This port is where you will connect the DSL/cable Modem, or Ethernet. ¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). ¾ USB: The USB port connects to a USB storage device or a USB printer. ¾ WPS/RESET: Press this button to quickly establish a connection between the Router and client devices that support Wi-Fi Protected Setup. Press and hold this button for more than 5 seconds (approximately 8 seconds) to reset the Router. There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on "System Tools → Factory Defaults" page in the Router's Web-based Utility. - 5 -