TP-Link TL-WR842ND TL-WR842ND V1 User Guide - Page 62
USB Settings - driver
View all TP-Link TL-WR842ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
TL-WR842ND 300Mbps Multi-Function Wireless N Router 10.0.0.10 and 10.0.0.1 respectively. Security protocol and other parameters for IPsec tunnel and the remote router should be configured the same. As Security Association is unidirectional, an ingoing SA and an outgoing SA are created to protect data flows for each tunnel after IPsec tunnel is successfully established. The ingoing SPI value and outgoing SPI value are different. However, the Incoming SPI value must match the Outgoing SPI value at the other end of the tunnel, and vice versa. 4.9 USB Settings Figure 4-37 The USB Settings menu There are four submenus under the USB Settings menu (shown in Figure 4-37), Storage Sharing, FTP Server, Media Server, Print Server and User Accounts. Click any of them, and you will be able to configure the corresponding function. 4.9.1 Storage Sharing Choose menu "USB Settings→Storage Sharing", you can configure a USB disk drive attached to the Router and view volume and share properties such as share name, capacity, used space, and free space, etc on this page as shown below. Figure 4-38 Storage Sharing ¾ Service Status - Indicates the Network Sharing service's current status. You can click the Start button to start the Storage Sharing service and click the Stop button to stop it. ¾ Volume - The volume name of the USB drive the users have access to. ¾ Capacity - The storage capacity of the USB driver. - 54 -