TP-Link TL-WR842ND TL-WR842ND V1 User Guide - Page 60
In Authentication Key
View all TP-Link TL-WR842ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
TL-WR842ND 300Mbps Multi-Function Wireless N Router Figure 4-35 IPsec Policy Settings ¾ Policy Name - Enter the name for the IPsec Policy. ¾ Local Subnet - Enter the local (LAN) subnet and mask.(ex. 192.168.0.0/24) ¾ Peer Subnet - Enter the Peer subnet and mask. ¾ Peer Gateway - Enter the Peer gateway or domain. ¾ Negotiation Mode - Here you could find two options, IKE Negotiation Mode and Manually Mode. You are recommended to select the default mode-- IKE Negotiation Mode, and all the parameters could be negotiated automatically according to IKE. If Manually Mode is selected, you should manually set up the Encryption and SPI parameters according to the instructions. ¾ Security Protocol - Select the Security Protocol from the drop-down list. Here you could find AH (Authentication Header) and ESP (Encapsulation Security Payload) protocols. ¾ Authentication Algorithm - Select the Authentication Algorithm for IPsec connection. You could also keep the default value "Auto". ¾ Encryption Algorithm - Select the Encryption Algorithm for IPsec connection. You could also keep the default value "Auto". ¾ In SPI - It is for direction in SPI parameter set in manual mode, and the parameter must be the same as peer Out SPI. ¾ In Authentication Key - It is for direction in authentication key set in manual mode, and the key must be the same as peer Out Authentication Key. ¾ Out SPI - It is for direction out SPI parameter set in manual mode, and the parameter must be same as peer In SPI. - 52 -