TP-Link TL-WR842ND TL-WR842ND V1 User Guide - Page 30
The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
View all TP-Link TL-WR842ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
TL-WR842ND 300Mbps Multi-Function Wireless N Router You can also keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then Choose "Press the button of the new device in two minutes" and click Connect. (Shown in the following figure) Figure 4-3 Add A New Device Step 2: Press and hold the WPS button of the client device directly. Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is on, the client device has successfully connected to the Router. Step 5: Refer back to your client device or its documentation for further instructions. II. Enter the client device's PIN on the Router Use this method if your client device has a Wi-Fi Protected Setup PIN number. Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then the following screen will appear. Figure 4-4 Add A New Device Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: "Connect successfully" will appear on the screen of Figure 4-4, which means the client device has successfully connected to the Router. - 22 -