TP-Link TL-WR842ND TL-WR842ND V1 User Guide - Page 64
FTP Server
View all TP-Link TL-WR842ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
TL-WR842ND 300Mbps Multi-Function Wireless N Router 4.9.2 FTP Server Choose menu "USB Settings→FTP Server", you can create an FTP server that can be accessed from the Internet or your local network. Figure 4-40 FTP Server Configuration ¾ Server Status - Indicates the FTP Server's current status. ¾ Internet Access - Select enable to allow access of the FTP server from the Internet. Otherwise, select disable to only allow local network access. ¾ Service Port - Enter the FTP Port number to use. The default is 21. ¾ Name - This folder's display name. ¾ Partition - The name of the partition is displayed. ¾ Folder - The real full path of the specified folder. To set up your FTP Server, please follow the instructions below: 1. Plug an external USB hard disk drive or USB flash drive into this Router. 2. Click the Enable/Disable radio box to enable/disable Internet access to FTP from WAN port. 3. Specify a port for the FTP server to use (The default port number is 21). 4. The Internet Address displays the WAN IP address of this router, so that other users can access FTP via this address. 5. If WAN type is PPPOE/PPTP/L2TP, two connections will be available. Therefore, users can access FTP server via two connections. Users in a private LAN can access ftp server via Public Address while Internet users can access ftp server via Internet Address. 6. Click the Start button to start the ftp server. - 56 -