TRENDnet TFM-560PCI Manual - Page 23

I101 V.90 PCI MODEM USER'S MANUAL A2.2.2.11 +IFC=[[,]] - DTE-Modem Local Flow Control This extended-format compound parameter controls the operation of local flow control between the DTE and the modem during the data state when V.42 error control is used, or when fallback to non-error control mode is specified to include buffering and flow control. It accepts two numeric subparameters. Defined Values Specifies the method to be used by the DTE to control the flow of received data from the modem. 0 None. 1 XON/XOFF on transmitted data (XON/XOFF on transmit data); do not pass XON/XOFF characters to the remote modem. 2 Circuit 133 (Ready for Receiving). (Default.) Specifies the method to be used by the modem to control the flow of transmitted data from the DTE. 0 None. 1 XON/XOFF on received data. 2 CTS/RTS. (Default.) Reporting Current or Selected Values Command: +IFC? Response: +IFC: , A2.2.2.12 +ILRR= - DTE-Modem Local Rate Reporting This extended-format numeric parameter controls whether or not the extended-format +ILRR: information text is transmitted from the modem to the DTE. Defined Values Decimal number corresponding to the selected option. 0 Disables reporting of local port rate (+ILRR: is not transmitted). 1 Enables reporting of local port rate (+ILRR: is transmitted). Reporting Current or Selected Values Command: +ILRR? Response: +ILRR: A2.2.3 Call Control A2.2.3.1 D - Dial This command directs the modem to go on-line, dial according to the entered string and attempt to establish a connection. If no dial string is supplied, the modem will go on-line and attempt the handshake in originate mode. NOTE: If the ATD command is issued before the S1 register has cleared, the modem will respond with the NO CARRIER result code. P.23 44