TRENDnet TFM-560PCI Manual - Page 36
A5.2.1 +VIP - Voice Initialize All Parameters
View all TRENDnet TFM-560PCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
I101 V.90 PCI MODEM USER'S MANUAL Appendix 5. VOICE COMMANDS Configuration Commands A5.1.1 +FCLASS=8 - Select Voice Mode +FCLASS=8 selects the Voice Mode. The Voice Mode commands and responses described in this section are applicable when command +FCLASS=8. (See Section 3.2.1.2 for the definition of the FCLASS command.) A5.1.2 +VNH= - Automatic Hang-up Control This command enables or disables automatic hangups. Defined Values Decimal number corresponding to the selected option. 0 The modem enables automatic hangups as is normal in other modes. 1 The modem disables automatic hangups usually found in the other non-Voice Modes. 2 The modem disables automatic hangups in the other non-Voice Modes. The modem performs only a "logical" hangup (returns to OK result code). Reporting Current or Selected Values Command: +VNH? Response: +VNH: Reporting Supported Range of Parameter Values Command: +VNH=? Response: +VNH: ( range) Voice Commands A5.2.1 +VIP - Voice Initialize All Parameters This command causes the modem to initialize all voice parameters to their default values. A5.2.2 +VRX - Start Modem Receive (Record) This command causes the modem to start the voice reception process. Defined Values Decimal number corresponding to the selected option. 0 Start receive voice without periodic tone production during a voice receive operation. 1 Start receive voice with periodic tone production during a voice re4ceive operation. Reporting Current or Selected Values Command: +VRX? Reporting Supported Range of Parameter Values Command: +VRX=? 5.2.3 +VTS= - Send Voice Tone(s) This command causes the modem to send DTMF tones, single frequency tone, and, optionally, double frequency P.36 44