Vtech Three Handset Connect to CELL™ Answering System with Caller ID Use - Page 29
Replace an active device, Bluetooth connection from idle mode, Cell Phone/Headset B to the base
View all Vtech Three Handset Connect to CELL™ Answering System with Caller ID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Bluetooth Replace an active device If you already have two active devices on the device list and you want to activate a different device, you must deactivate one of the two active devices. To replace an active device: 1. Press MENU on the handset when it is not in use. 2. Press or to highlight Bluetooth, then press SELECT. 3. Press or to highlight Device list, then press SELECT. 4. Press or to highlight the device you want to activate, without a prefix D1: or D2:, then press OPTION. 5. Press or to highlight Connect, then press SELECT. The handset displays Only 2 devices can be ready for connection and then a list of devices for deactivation. 6. Press or to highlight the device to be deactivated, then press NEXT. The handset displays Cell Phone/Headset A is deactivated and you hear a confirmation tone. The handset displays Connecting Cell Phone/Headset B to the base... 7. Depending on your cell phone settings, you may need to press a key on your cell phone to confirm the connection. When the new device is successfully activated and connected, the handset displays Device connected. You hear a confirmation tone. BLUETOOTH Add device Device list Download dir Change PIN BACK SELECT 1 DEVICE LIST D1:Headset A D2:Cell Phone A Cell Phone B Cell Phone C BACK OPTION 1 Cell Phone B Connect Remove Rename BACK SELECT Connecting Cell Phone B to the base... Bluetooth connection from idle mode When you have active devices that are not connected, CONNECT appears on the idle handset. Press CONNECT to start connecting an active device. When there are two active devices, the handset will prompt you to choose one before connection. 1 HANDSET 1 --:-CONNECT --/-MENU 24