Vtech Three Handset Connect to CELL™ Answering System with Caller ID Use - Page 54

Telephone operation Equalizer The equalizer feature on the handset enables you to change the quality of the handset audio to best suit your hearing. While on a call, an intercom, a PTT session, or listening to a message or announcement, press to select the equalizer setting Treble 1, Treble 2, Bass or Natural (the default setting) for the handset. You hear an in-ear beep while adjusting. If you turn off the key tone, the in-ear beep will not be heard. The current setting is shown on the handset for two seconds. • The equalizer feature does not apply to the speakerphone on the telephone base or the connected Bluetooth headset. • If you switch the call between the handset and the speakerphone by pressing , the audio setting remains unchanged. • The current equalizer setting remains unchanged until a new setting is selected. Transfer a call While on an outside call, you can transfer the call from one handset to another. 1. Press OPTION, then press SELECT to highlight Transfer. • If you have two handsets, your handset displays Transferring call to HANDSET X. The destination handset rings and displays Home Transfer from other handset. • If you have three or more handsets, your handset displays TRANSFER TO: and a list of registered handsets. Press or to highlight a destination handset and then press SELECT. Your handset displays Transferring call to HANDSET X, or Transferring call to all... when you choose All handsets. The destination handset rings and displays Home Transfer from HANDSET X or Home Transfer from HANDSET X to all. 2. Your handset displays Call transferred when the other handset picks up the call. You hear a confirmation tone. If the destination handset does not answer within 30 seconds, the originating handset displays No response to transfer and rings. If the originating handset does not answer the call on hold within 30 seconds, the call will end automatically. 49