Weider 9900i Uk Manual - Page 19
Identify the High Cable 44.
View all Weider 9900i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
28. Identify the High Cable (44). Route the High Cable through the bracket on the Top Frame (6) 28 and over a Pulley (69). Attach the Pulley (69) inside the Top Frame (6) with an M10 x 68mm Bolt (66), two 14.8mm Spacers (95), and an M10 Locknut (74). 69 74 95 44 6 95 66 29. Route the High Cable (44) over a Pulley (69). 29 Attach the Pulley (69) and a Cable Trap (71) to the right side of the Top Frame (6) with an M10 x 93mm Bolt (63), an M10 Washer (88), and an M10 Locknut (74). Make sure that the Cable Trap is oriented to hold the High Cable in the groove of the Pulley. 74 71 69 6 44 88 63 30. Route the High Cable (44) under a V-pulley 30 (67). Attach the V-pulley (67) and a Cable Trap (71) to the Upright (5) with an M10 x 57mm Bolt (93) and an M10 Locknut (74). Make sure that the Cable Trap is oriented to hold the High Cable in the groove of the V-pulley. 93 71 44 67 5 74 19