Weider 9900i Uk Manual - Page 24

Route the Low Cable 43 through the Upright

Get Weider 9900i PDF manuals and user guides View all Weider 9900i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

42. Route the Low Cable (43) under a Pulley (69). 42 Attach the Pulley (69) and a Cable Trap (71) to the front bracket on the Base (1) with an M10 x 50mm Button Bolt (76), two Half Guards (72), and an M10 Locknut (74). Make sure that the Cable Trap (71) is oriented to hold the Low Cable (43) in the groove of the Pulley (69). Make sure that the Half Guards (72) are outside the bracket. 43 69 74 72 71 72 1 76 43. Route the Low Cable (43) through the Upright (5) as shown. 43 Attach a V-pulley (67) inside the Upright (5) under the Low Cable (43) with an M10 x 65mm Bolt (75), two M10 Washers (88), two 6.35mm Spacers (94), and an M10 Locknut (74). 5 74 43 88 88 94 67 94 75 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
24
42
42. Route the Low Cable (43) under a Pulley (69).
Attach the Pulley (69) and a Cable Trap (71) to
the front bracket on the Base (1) with an M10 x
50mm Button Bolt (76), two Half Guards (72),
and an M10 Locknut (74).
Make sure that the Cable Trap (71) is ori-
ented to hold the Low Cable (43) in the
groove of the Pulley (69). Make sure that the
Half Guards (72) are outside the bracket.
69
74
76
72
72
1
43
43
43. Route the Low Cable (43) through the Upright
(5) as shown.
Attach a V-pulley (67) inside the Upright (5)
under the Low Cable (43) with an M10 x 65mm
Bolt (75), two M10 Washers (88), two 6.35mm
Spacers (94), and an M10 Locknut (74).
5
43
75
88
88
74
94
94
67
71