Weider 9900i Uk Manual - Page 34
Adjustment
View all Weider 9900i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
ADJUSTMENT This section explains how to adjust the weight system. See the EXERCISE GUIDELINES on page 40 for important information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for several exercises. Make sure that all parts are properly tightened each time the weight system is used. Replace any worn parts immediately. CHANGING THE WEIGHT SETTING To change the setting of the weight stack, insert a Weight Pin (41) under the desired Weight (30). Insert the Weight Pin so that the bent end touches the weight stack. Turn the bent end downward. Note: Due to the cables and pulleys, the amount 30 of resistance at each exercise station may vary from the weight setting. Use the WEIGHT 41 RESISTANCE CHART on page 37 to find the approximate amount of resistance at each weight station. ADJUSTING THE SEAT, THE BACKREST, AND THE LEG LOCK FRAME To adjust the Seat (24), remove the Adjustment Knob (29), move the Seat to the desired position, and then tighten the Adjustment Knob into the Seat Tube (8) and one of the holes in the Cushion Frame (not shown). Make sure that the Adjustment Knob is engaged in a hole. Adjust the Backrest (25) and the Leg Lock Frame (12) in the same way. 25 24 12 29 8 29 34