Weider 9900i Uk Manual - Page 8
Do not fully tighten the, Locknuts yet.
View all Weider 9900i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Attach the U-stabilizer (3) to the Base (1) with two M10 x 68mm Bolts (66), two M10 Washers 3 (88), and two M10 Locknuts (74). 3 88 66 74 1 74 88 4. Orient the Upright (5) as shown. 4 Attach the Upright (5) to the Base (1) and the Side Stabilizers (2) with four M10 x 55mm Bolts (79), four M10 Washers (88), and four M10 Locknuts (74). Do not fully tighten the Locknuts yet. 5 74 74 74 2 2 1 88 88 79 79 8
8
3.
Attach the U-stabilizer (3) to the Base (1) with
two M10 x 68mm Bolts (66), two M10 Washers
(88), and two M10 Locknuts (74).
3
88
88
3
74
74
1
4
4.
Orient the Upright (5) as shown.
Attach the Upright (5) to the Base (1) and the
Side Stabilizers (2) with four M10 x 55mm Bolts
(79), four M10 Washers (88), and four M10
Locknuts (74).
Do not fully tighten the
Locknuts yet.
74
5
74
74
1
2
2
79
79
88
88
66