Whirlpool GBS277PDB Technical Guide - Page 29

To remove the oven temperature sen

Get Whirlpool GBS277PDB PDF manuals and user guides View all Whirlpool GBS277PDB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

d) Pull the halogen socket assembly out of the oven liner and cut the wires near the socket terminals. Cut Wires Here 4. To remove the oven temperature sensor: a) Remove the two mounting screws from the oven temperature sensor and pull the connector out of the mounting hole in the oven liner. Screws Oven Temperature Sensor b) Disconnect the sensor connector from the main wire harness connector. e) Cut the new halogen light socket wires to the proper length. f) Remove 3/8˝ of insulation from the cut wires on the wire harness and the halogen light socket. Splice the halogen light socket wires to the harness wires, and twist two wire nuts over the bare wire ends. Sensor Connector 4-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
4-9
4.
To remove the oven temperature sen-
sor:
a)
Remove the two mounting screws from
the oven temperature sensor and pull
the connector out of the mounting hole
in the oven liner.
Oven
Temperature
Sensor
Sensor
Connector
d) Pull the halogen socket assembly out
of the oven liner and cut the wires near
the socket terminals.
e)
Cut the new halogen light socket wires
to the proper length.
f)
Remove 3/8˝ of insulation from the cut
wires on the wire harness and the halo-
gen light socket. Splice the halogen
light socket wires to the harness wires,
and twist two wire nuts over the bare
wire ends.
Cut Wires Here
Screws
b)
Disconnect the sensor connector from
the main wire harness connector.