Whirlpool GBS277PDB Technical Guide - Page 30
Removing The Broil Element
View all Whirlpool GBS277PDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
REMOVING THE BROIL ELEMENT WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing. Replace all panels before operating. Failure to do so could result in death or electrical shock. 3. Remove the two front bracket screws and two rear bracket screws from the broil element. Front Bracket Screws CAUTION: When you work on the built-in oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Disconnect the electrical power to the oven. 2. Open the oven door and remove the racks from inside the oven. Rear Bracket Screws 4. Carefully pull the element forward so that the wires are through the oven liner holes, and disconnect the wires from the terminals. 4 Element Wires Broil Element 4-10