Whirlpool GBS277PDB Technical Guide - Page 35
To remove the convection fan motor
View all Whirlpool GBS277PDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
6. To remove the convection fan motor: a) If not already done, remove the convection cover and the convection bake element from the rear of the oven liner (see page 4-14). b) Use a 10 mm (7/16˝) socket and remove the hex nut from the convection fan. NOTE: The nut has a left-rotation thread for removal. Convection Fan 10 mm (7/16˝) Hex Nut c) Remove the three front convection fan motor screws from the rear of the oven liner. Convection Fan Motor Front Screw (1 of 3) f) Remove the two rear convection fan motor mounting screws from the oven, and remove the motor from the rear of the oven. Convection Fan Motor Convection Fan Motor Rear Screw (1 of 2) d) Pull the oven out of its mounting location (see page 4-4, steps 1 through 3 for the procedure) so that you can access the rear cover. e) Remove the rear cover from the oven (see page 4-5 for the procedure). Convection Fan Motor Terminals 4-15