Whirlpool GBS277PDB Technical Guide - Page 36

Removing The Oven Shutdown Thermal Fuse

Get Whirlpool GBS277PDB PDF manuals and user guides View all Whirlpool GBS277PDB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

REMOVING THE OVEN SHUTDOWN THERMAL FUSE WARNING Oven Shutdown Thermal Fuse ELECTRICAL SHOCK HAZARD Disconnect power before servicing. Replace all panels before operating. Failure to do so could result in death or electrical shock. CAUTION: When you work on the built-in oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Disconnect the electrical power to the oven. 2. Pull the oven out of its mounting location, (see page 4-4 steps 1 through 3 for the procedure), so that you can access the rear cover. 3. Remove the rear cover from the oven (see page 4-5 for the procedure). 4. Disconnect the wires from the thermal fuse terminals. Mounting Screw (1 of 2) Oven Shutdown Thermal Fuse 5. Remove the two screws and remove the fuse from the rear of the oven. 4-16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
4-16
REMOVING THE OVEN SHUTDOWN THERMAL FUSE
1.
Disconnect the electrical power to the
oven.
2.
Pull the oven out of its mounting location,
(see page 4-4 steps 1 through 3 for the
procedure), so that you can access the
rear cover.
3.
Remove the rear cover from the oven (see
page 4-5 for the procedure).
4.
Disconnect the wires from the thermal
fuse terminals.
5.
Remove the two screws and remove the
fuse from the rear of the oven.
Oven Shutdown
Thermal Fuse
CAUTION:
When you work on the built-in
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
WARNING
Mounting Screw (1 of 2)
Oven Shutdown Thermal Fuse