Xerox 6180N FreeFlow® Print Server IBM® IPDS User Guide - Page 20

Installation and Setup i5/OS® (System i) Setup You must set several parameters for resident outline font support. If you do not set these parameters properly, jobs submitted from i5/OS® (System i) expecting resident outline fonts may fail or print blank pages. If your host is a System i running i5/OS® and you require resident outline font support, the recommended setup is: • On the i5/OS® host, set the Resident Font parameter in the PSF Configuration object to *YES. • In the IPS Manager, ensure Enhanced Font Support is set to Enabled. • In the IPS Manager, load the AFP fonts using the Manage Fonts Dialog. Defining a Logical Printer Before using Xerox FreeFlow® Print Server IPDS to process IPDS data streams, the host must have a printer defined for Xerox FreeFlow® Print Server IPDS with the following requirements: • For TCP/IP connectivity, the Internet Protocol (IP) address and port number of the printer must match the IP address and port number of the printer. Valid values are 5001 through 65535. • For channel connectivity, the unit address specified for the host printer definition must be a unique value and must match the unit address specified on the IPS Manager. • For z/OS® (MVS), the printer must be defined as an AFP-type device. TCP/IP and channel connectivity can be established in the IPS Manager System pull-down menu, System Configuration dialog box. Verifying the Installation 2-10 The following steps should be completed for a successful installation of the Xerox FreeFlow® Print Server IPDS software, and proper queue and printer setup: • Install the IPS Manager software. The Xerox Service Representative performs this task. • Ensure that the IPDS Interpreter license file has been loaded, and that IPDS is active and enabled in the print server Feature Manager. • Ensure a streaming print queue is defined on the print server for your system. You can view this queue by using the print IPDS User Guide