Xerox 6180N FreeFlow® Print Server IBM® IPDS User Guide - Page 49

Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix Reference Documents - z/OS The following documents provide additional information on z/OSto-IPDS printer connectivity. Table A-1. Reference Documents - z/OS Title Print Services Facility for z/OS: Customization z/OS Communications Server IP Configuration Reference z/OS JES2 Initialization and Tuning Guide z/OS JES2 Initialization and Tuning Reference z/OS JES3 Initialization and Tuning Guide z/OS JES3 Initialization and Tuning Reference z/OS JES3 Hardware Configuration Definition (HCD) User's Guide z/OS Infoprint Server Customization z/OS Infoprint Server Operation and Administration Publication Number S550-0427 SC31-8776 SA22-7532 SA22-7533 SA22-7549 SA22-7550 SC33-7988 S544-5744 S544-5745 IBM z/OS manuals are available on the IBM website. Configuring IBM i5/OS This section describes the process of configuring an i5/OS system to communicate and print on a Xerox FreeFlow Print Server IPDS printer using TCP/IP on a System i series server. Configuration Overview - i5/OS Configuring the Xerox FreeFlow Print Server IPDS printer with TCP/IP on the i5/OS system involves setting up 3 components: 1. IPS Manager System Configuration Menu (Refer to System Configuration). NOTE: The printer IP Address is specified during the initial software load. Set the TCP/IP port number in the IPS Manager System Configuration dialog. 2. TCP/IP for i5/OS parameters (Refer to System i Networking TCP/IP Setup) IPDS User Guide A- 3