Xerox 6180N FreeFlow® Print Server IBM® IPDS User Guide - Page 52

NOTE: The printer IP Address is specified during the initial software load. Set the TCP/IP port number in the IPS Manager System Configuration dialog. 2. Infoprint Manager procedure (Refer to the Infoprint Manager for Windows: Introduction and Planning Guide and the Infoprint Manager for Windows: Getting Started) Reference Documents - Windows The following documents provide additional information on WIndows-to-IPDS printer connectivity. Table A-4. Reference Documents - Windows Title Infoprint Manager for Windows: Introduction and Planning Guide Infoprint Manager for Windows: Getting Started IBM Infoprint Manager for Windows: Procedures IBM Infoprint Manager Reference Publication number G544-5716 G544-5717 G544-5814 S544-5475 IBM Infoprint Manager for Windows manuals are available on the IBM website. Testing the Printer Connection Test the printer by one of the following methods to ensure the system can make a connection with the Xerox FreeFlow Print Server IPDS printer: • Ping the printer from your system to establish a connection with the TCP/IP attached Xerox FreeFlow Print Server IPDS system. • Send a job from the host through PSF or Infoprint Manager (depending on your host) to print on the Xerox FreeFlow Print Server IPDS system. A-6 IPDS User Guide