Yamaha HTR-5280 Owner's Manual - Page 46
DOLBY D. SET Dolby Digital, DTS LFE LEVEL, 1/ES AUTO, 10B D-RANGE dynamic range
UPC - 072874307073
View all Yamaha HTR-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SET MENU 10 DOLBY D. SET (Dolby Digital set) This setting is effective only when this unit decodes Dolby Digital signals. I 10A LFE LEVEL Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the lowfrequency special effect sound which is only added to certain scenes. Control value (dB): -20 to 0 Initial setting: 0 dB for both SPEAKER and HEADPHONE Note • Adjust the LFE level according to the capacity of your subwoofer or headphones. I 10B D-RANGE (dynamic range) Use this feature to adjust the dynamic range. Choices: MAX, STD (standard), MIN Initial setting: MAX for both SP (speaker) and HP (headphones) • Select MAX for feature films. • Select STD for general use. • Select MIN for listening to sources at an extremely low volume level. MAX Dialog level 11 DTS LFE LEVEL This setting is effective only when this unit decodes DTS signals. Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a DTS signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes. Control range (dB): -10 to +10 Initial setting: 0 dB for both SPEAKER and HEADPHONE Note • Adjust the LFE level according to the capacity of your subwoofer or headphones. 12 6.1/ES AUTO Use this feature to switch the auto mode of the Dolby Digital Matrix 6.1 or DTS ES decoder on or off. Choices: ON, OFF Initial setting: ON ON Select this to allow this unit to automatically turn on the Dolby Digital Matrix 6.1 or DTS ES decoder when a signal with the appropriate identification is detected. OFF Select this if you want to turn on or off the Dolby Digital Matrix 6.1 or DTS ES decoder manually by pressing 6.1/ ES on the remote control. Output level Input level STD MIN Dialog H-LEVEL CUT 0.0 level 1.0 Dialog level Output level Output level 1.0 0.0 L-LEVEL BST Input level Input level Note • When you select MIN, the sound output may be faint because some Dolby Digital signals are not compatible with the minimum-level dynamic range. In this case, select MAX or STD. 42