Yamaha HTR-5590 Owner's Manual - Page 29

INTRODUCTION PREPARATION BASIC OPERAIONT ADJUSTING THE SPEAKER OUTPUT LEVELS This section explains how to adjust the speaker output levels by using the test tone generator. When this adjustment is made, the output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor, and various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic , DTS, DTS ES, and DTS Neo: 6). Note • Since this unit cannot enter the test mode while headphones are connected to this unit, be sure to unplug the headphones from the PHONES jack when using the test tone. Before You Begin NATURAL SOUND AV RECEIVER D I G I TA L STANDBY /ON 6CH INPUT MODE SPEAKERS A B BASS PROCESSOR EXTENSION DIRECT TUNER DSP A/B/C/D/E PRESET/ TUNING STEREO EFFECT PROGRAM PRESET TUNING /TUNING FM/AM MEMORY MODE EDIT PHONES MAN'L/AUTO FM AUTO/MAN'L MONO S VIDEO VIDEO L AUDIO R OPTICAL SILENT VIDEO AUX VOLUME BASS TREBLE - + - + Using the Test Tone (TEST DOLBY SUR.) Use the test tone to balance the output levels of the speakers required for a surround sound system. The adjustment of each speaker output level should be made at your listening position with the remote control. After completing the adjustments, use VOL +/- at your listening position to check if the adjustments are satisfactory. 4 2,5 SELECT POWER TV REC DISC SKIP POWER AV AMP AUDIO + VOL - LEVEL TITLE TV INPUT + TV VOL SET MENU MENU A/B/C/D/E MUTE CH - PRESET TEST RETURN TV MUTE SELECT TV VOL - CH + PRESET ON SCREEN DISPLAY STEREO EFFECT 1 3 1 Press AMP to select the AMP 23 3 AMP mode. AMP appears in the display window on the remote control. 1 Turn on the video monitor connected to this unit. 2 Press TEST to output the TEST test tone. RETURN 2 Press SPEAKERS A or B SPEAKERS to select the main A B speakers to be used. If you are using two sets of the main speakers, press both A 3 Adjust the volume of this unit so you can hear the + test tone. VOL and B. - 3 Set the BASS and TREBLE controls on the front panel to the center position and turn off BASS EXTENSION and PROCESSOR DIRECT by pressing the buttons. "BASS EXT. OFF" and "P. DIRECT OFF" appear on the front panel display. BASS TREBLE BASS PROCESSOR EXTENSION DIRECT - + - + Set to OFF. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 25