Yamaha HTR-5590 Owner's Manual - Page 42

DIGITAL SOUND FIELD PROCESSING (DSP) Table of Program Names for Each Input Format Input DOLBY DIGITAL No. Program 2 channel Stereo DOLBY DIGITAL EX decoder: inactive (off) DOLBY DIGITAL EX decoder: active (on) 8 MOVIE THEATER 1 70 mm Spectacle 70 mm Sci-Fi DGTL Spectacle DGTL Sci-Fi Spectacle EX Sci-Fi EX 9 MOVIE THEATER 2 70 mm Adventure DGTL Adventure 70 mm General DGTL General Adventure EX General EX 10 DOLBY DIGITAL - Normal Dolby D EX - Enhanced EX Enhanced DTS DGTL - SUR - - - - - PRO LOGIC Normal - - Enhanced - - PRO LOGIC Movie - - Music - - DTS Neo: 6 Cinema - - Music - - DTS DTS ES decoder: inactive (off) DTS ES decoder: active (on) DTS Spectacle Spectacle ES DTS Sci-Fi Sci-Fi ES DTS Adventure Adventure ES DTS General General ES - - - - Normal ES Matrix 6.1*1 ES Dscrt 6.1 *2 Enhanced Enhanced ES - - - - - - - - - - - - *1 means the DTS ES Matrix decoder is active. *2 means the DTS ES Discrete decoder is active. y • If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically switched to the Dolby Digital playback sound field or DTS playback sound field. • If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the EX/ES button on the remote control, the Dolby Digital EX or DTS ES decoder will automatically turn on and the corresponding DSP program will be selected. • EX/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the program name changes to the corresponding name for 6.1 channel. • When playing 6.1 channel source with EX/ES on the remote control off, the program name changes to the corresponding name for 5.1 channel. Note • The " " indicator does not light up when selecting the program No. 10 except for the Enhanced mode. 38