Yamaha HTR-5590 Owner's Manual - Page 44

TUNING Presetting Stations I Automatically presetting stations (for FM stations) You can use the automatic preset tuning feature to store FM stations. This function enables this unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset station by selecting the preset station number (see page 41). NATURAL SOUND AV RECEIVER D I G I TA L STANDBY /ON 6CH INPUT MODE SPEAKERS A B BASS PROCESSOR EXTENSION DIRECT TUNER DSP A/B/C/D/E PRESET/ TUNING STEREO EFFECT PROGRAM PRESET TUNING /TUNING FM/AM MEMORY MODE EDIT PHONES MAN'L/AUTO FM AUTO/MAN'L MONO S VIDEO VIDEO L AUDIO R OPTICAL SILENT VIDEO AUX VOLUME BASS TREBLE - + - + 132 1 Press FM/AM to select the FM band. FM/AM 2 Press TUNING MODE (AUTO/MAN'L MONO) so that the "AUTO" indicator lights up on the front panel display. TUNING MODE AUTO AUTO/MAN'L MONO Lights up 3 Press and hold MEMORY (MAN'L/AUTO FM) for more than 3 seconds. The preset number, the "MEMORY" and "AUTO" indicators flash. Then, after about 5 seconds, automatic preset tuning begins from the frequency currently displayed toward the higher frequencies. MEMORY MAN'L/AUTO FM Notes • Any stored station data existing under a preset number is cleared when you store a new station under that preset number. • When a station data is stored under a preset number, the frequency and reception band are also stored. • You can manually replace a preset station with another FM or AM station by simply following the procedure in the section "Exchanging Preset Stations" on page 42. • If the number of the received stations does not reach E8, automatic preset tuning has automatically stopped after searching all stations. • Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune in to it manually in the monaural mode, and store it by following the procedure in "Manually presetting stations" on page 41. I Automatic preset tuning options You can select the preset number from which this unit will store FM stations and/or begin tuning toward lower frequencies. 1. Repeat steps 1 and 2 in "Automatically presetting stations" on left. 2. After pressing MEMORY (MAN'L/AUTO FM) for about 3 seconds, press A/B/C/D/E, then PRESET/ TUNING l / h to select the preset number under which the first station will be stored. Automatic preset tuning will stop when stations have all been stored up to E8. 3. Press PRESET/TUNING (EDIT) to turn off the colon (:) and then press PRESET/TUNING l to begin tuning toward lower frequencies. Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the preset stations may be cleared. If so, store the stations again by using the presetting station methods. V AUX VCR2/DVR VCR 1 CBL/SAT D TV/LD DVD MD/TAPE CD R TUNER CD PHONO AUTO MEMORY SP A1:FM~~~~~~~~~ A VOLUME L R When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station. 40