Yamaha MOX8 Reference Manual - Page 77

VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE  (Tempo) Determines the Song playback tempo. Settings: 5.0 - 300.0 NOTE If you are using this instrument with an external sequencer, DAW software, or MIDI device, and you want to synchronize it with that device, set the "MIDI Sync" parameter in the Utility MIDI display (page 149) to "external" or "auto." When "MIDI Sync" is set to "auto" (only when MIDI clock is transmitted continuously) or "external," the Tempo parameter here indicates "external" and cannot be changed. NOTE This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the desired tempo. This function is referred to as "Tap Tempo."  MEAS (Measure) Determines the location at which playback starts. This also indicates the current location of playback.  SCN1 (Scene 1) - [SF6] SCN6 (Scene 6) You can assign the settings of the Song-related parameters (Song Scene) and the Arpeggio-related parameters to these buttons. You can also recall the settings by pressing these buttons. For detailed instructions on registering Scenes, see the "Assigning various settings related to Song playback (Song Scene)" on page 97. For detailed instructions on setting the Arpeggio-related parameters, see page 82. NOTE Pressing the [SF1] SCN1 - [SF6] SCN6 during playback changes only the Song Scene. NOTE After registering the Song Scene, the 8th note icon will appear on the tab corresponding to the pressed button. You can confirm whether the Arpeggio Type is assigned to that button in the Arpeggio Edit display (page 82) of the Song mode. [F2] GROOVE (Grid Groove) The Grid Groove function makes it possible to adjust the pitch, timing, length, and velocity of notes in a specified Track via a 1-measure 16th-note grid to create "grooves" with precise sequencer-like programming, which would not otherwise be possible. The Grid Groove function affects Song playback without actually changing the sequence data. - 0 + NOTE OFST (Note Offset) CLOCK SFT (Clock Shift) GATE OFFSET (Gate Time Offset) VELO OFST (Velocity Offset) NOTE OFST (Note Offset) Raises or lowers the pitch of the note(s) on the selected grid in semitones. Settings: -99 - +00 - +99 CLOCK SFT (Clock Shift) Shifts the timing of the note(s) on the selected grid forward or backward in clock increments. Settings: -120 - +000 - +120 GATE OFFSET (Gate Time Offset) Lengthens or shortens the note(s) on the selected grid in clock increments. Settings: -120 - +000 - +120 VELO OFST (Velocity Offset) Increases or decreases the velocity of the note(s) on the selected grid. Settings: -127 - +000 - +127 Song Mode Song Play [F1] PLAY [F2] GROOVE [F3] TRACK [F6] CHAIN Song Record Song Record Standby [F1] SETUP [F2] VOICE [F3] ARP ED [F5] CLICK [F6] ALL TR During Song Recording [F1] SETUP [F3] REST [F4] TIE [F5] DELETE [F6] BAK DEL Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN [F4] LIMIT [F5] PLAY FX [F6] OUT CH Song Edit [F1] CHANGE [F2] VIEW FLT [F4] TR SEL [F5] INSERT [F6] DELETE Song Job [F1] UNDO/REDO [F2] NOTE [F3] EVENT [F4] MEAS [F5] TRACK [F6] SONG Supplementary Information MOX6/MOX8 Reference Manual 77