Yamaha RM1x Owner's Manual - Page 114
Convert, Chain
View all Yamaha RM1x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
3. Job t Convert Job 05 Convert to Song 1 Job 07 Clear Chain 1 PATTERN CHAIN MODE This job converts the Pattern Chain data to Song data and places the results in the normal song tracks after converting the data to standard MIDI format. The expanded data is placed in song tracks 1 through 16. Any previous data in those tracks will be erased! 1. Song Specifies the Song number to which the converted data will be saved. s Settings : 01 ... 20 This job deletes all data from the selected pattern chain. 1. Chain Selects the pattern chain to be deleted. s Settings : 01 ... 20 Job 08 Chain Name 2. Start Measure Specifies the measure from which the converted data will start in the destination Song. s Settings : 001 ... 999 You use this job to set or change the name for the currently selected pattern chain. t Chain Job 06 Copy Chain 1 Use Display Knobs 1 and 2 to select a character location and character, then press the F2 function button (Enter) to enter the specified character at the selected location. The F1 function button (Delete) can be used to back up one character location and delete the character at that location. Repeat until the chain name is complete. 2 This job copies the selected pattern chain (including PLAY FX and VOICE submode settings) into another pattern chain location. Following the copy, the selected pattern chain will exist at two pattern chain locations. The copy operation causes loss of any data already existing in the destination pattern chain. 1. Source pattern chain The first Chain value selects the Pattern chain to be copied. s Settings : 01 ... 20 2. Destination pattern chain The second Chain value selects the destination. s Settings : 01 ... 20 114 RM1x SEQUENCE REMIXER