Yamaha RM1x Owner's Manual - Page 56
Recor, ding the Grid Gr, oove Settings
View all Yamaha RM1x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
PATTERN MODE 3. Groove Recording the Grid Groove Settings The grid groove settings can actually be merged into the sequence data as follows. 1 Make the Grid Groove settings as described above. 2 Press the [PATTERN] button to go to the Pattern play- back mode. 3 Press the REC e button to engage the record standby mode. 4 Set the REC TYPE parameter to "OVERDUB." 5 Press the PLAY p button to begin recording. You don't actually need to record any new data; the grid groove setting will automatically be recorded. 6 Press the STOP s button to stop recording after the pattern has played through once. The Grid Groove settings will automatically be initialized when recording is stopped. 56 RM1x SEQUENCE REMIXER
56
RM1x SEQUENCE REMIXER
PATTERN MODE
Recor
ding the Grid Gr
oove Settings
The grid groove settings can actually be merged into the se-
quence data as follows.
1
Make the Grid Groove settings as described above.
2
Press the [PATTERN] button to go to the Pattern play-
back mode.
3
Press the REC
e
button to engage the record
standby mode.
4
Set the REC TYPE parameter to “OVERDUB.”
5
Press the PLAY
p
button to begin recording. You
don’t actually need to record any new data; the grid
groove setting will automatically be recorded.
6
Press the STOP
s
button to stop recording after
the pattern has played through once. The Grid Groove
settings will automatically be initialized when record-
ing is stopped.
3. Groove