Yamaha RM1x Owner's Manual - Page 60

PATTERN MODE 5. MIDI delay 5. MIDI delay MIDI Delay submode creates delay effects that can sound much the same as those created by conventional delay effect units, but the delays are created by manipulating the MIDI note data rather than the audio signal. t Delay Track number Transpose Parameter Delay time Delay level Repeat times Track number Transpose Values 0030, 0040, 0060, 0080, 0120, 0160, 0240, 0320, 0360, 0480, 0720, 0960, 1920 (0030 ... 1920) 000 ... 127 00 ... 64 01 ... 16 -36 ... +36 Function Specifies the length of the delay. Please note that the values do not change continuously when using Display Knob 1. The delay time can be adjusted in 1-step increments from 0030 to 1920 by placing the cursor at the DELAY TIME parameter and using the [NO -1]/ [YES +1] buttons. The values correspond to MIDI clocks (480 clocks per quarter note), thus a setting of "120" produces a 16th-note delay, a setting of "240" produces a 8th-note delay, etc. Specifies the level (volume) of the delay sound as a percentage. The higher the value the louder the delay sound. Sets the number of delay repeats. A setting "3," for example, produces 3 repeats. Shows the current selected track number. Track number selection can be accomplished via this parameter, or by the keyboard method described on page 27. Shows the current transpose value. Transposition can be accomplished via this parameter, or by the keyboard method described on page 27. * For information about how to change values, refer to the Basic Operation (page26). 60 RM1x SEQUENCE REMIXER