Yamaha YSP-5100BL Owners Manual - Page 12

Connections Before connecting components ■ Cables used for connections The symbols on the left of cable names (such as , , and ) correspond with the symbols described in "Connecting your TV and Blu-ray disc player" (page 12) and "Connecting audio video components" (page 13). For audio and video HDMI cable For audio Audio pin cable (supplied) Optical cable (supplied) Digital audio pin cable (supplied) For video Video pin cable (supplied) Component video pin cable ■ Information on HDMI An HDMI cable can transmit both audio and video signals at the same time. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections. See also: "Using the HDMI control function" (page 31), "INPUT MENU" (page 38) Input source Audio signal type Blu-ray disc HD DVD Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, 2-channel PCM, multi-channel PCM DVD video Dolby Digital, DTS, 2-channel PCM, multi-channel PCM DVD audio 2-channel PCM, multi-channel PCM y • This unit automatically converts input video signals and outputs the signals from the HDMI OUT jack. • The HDMI of this unit supports High-Bandwidth Digital Content Protection (HDCP), • We recommend that you use an HDMI cable shorter than 5 m (16 ft) with the HDMI logo printed on it. ■ Priority order for audio input signals When digital and analog audio signals are simultaneously input from a single source component, this unit plays back digital audio signals by priority. For example, if audio signals are input to the DIGITAL IN (AUX 1) and AUDIO IN (AUX 1) jacks simultaneously, this unit plays back audio signals input to the DIGITAL IN (AUX 1) jack when "AUX1" is selected as the input source. Connecting external components Connect external components (TV, Blu-ray disc player, etc.) to this unit. Do not plug the power supply cable into an AC wall outlet until all connections are complete. ■ Connecting your TV and Blu-ray disc player The following connection example shows a way to connect your TV and Blu-ray disc player by using the HDMI jacks. When you connect them by using the other jacks, refer to "Connecting audio and video components" (page 13). The symbols beside the cables correspond with the symbols described in "Cables used for connections" (page 12). TV Blu-ray disc player 1. Pull out the cap (if attached) Optical digital output HDMI input 2. Check the direction SIRIUS AUX 2 AUX 1 TV DIGITAL IN HDMI output OUT HDMI IN 1 IN 2 IN 3 IN 4 to AC wall outlet Power cable 12 En