Yamaha YSP-5100BL Owners Manual - Page 19

INTRODUCTION PREPARATION PLAYBACK FEATURES Using the system memory You can save the current beam and sound settings in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed. y • If there are curtains in your listening room, we recommend following the procedure below. 1. While the curtains are open, run "BEAM+SOUND OPTIMZ" (page 16) and then save the settings to "MEMORY1". 2. While the curtains are closed, run "SOUND OPTIMZ ONLY" (page 16) and then save the settings to "MEMORY2". Saving settings 1 Press ISETUP. 5 Press GENTER. The current beam and sound settings are saved to the selected memory number. p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;SOUND SET MENU ;SOUND OUT MENU ;INPUT MENU ;DISPLAY MENU [ ]/[ ]:Up/Down [ENTER]:Enter 2)MEMORY SAVE MEMORY1 Saving... Changing OSD language AUTO SETUP (IntelliBeam) Using the system memory p p p p 2 Press GENTER. A)MEMORY 1)LOAD 2)SAVE [ ]/[ ]:Up/Down [ENTER]:Enter 3 Press G / to select "SAVE" and then press GENTER. 2)MEMORY SAVE a)MEMORY1 b)MEMORY2 c)MEMORY3 [ ]/[ ]:Up/Down [ENTER]:Enter 4 Press G / to select the desired memory number and then press GENTER. 2)MEMORY SAVE MEMORY1 Save Now? Loading settings 1 Press ISETUP. SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;SOUND SET MENU ;SOUND OUT MENU ;INPUT MENU ;DISPLAY MENU [ ]/[ ]:Up/Down [ENTER]:Enter 2 Press GENTER. A)MEMORY 1)LOAD 2)SAVE [ ]/[ ]:Up/Down [ENTER]:Enter 3 Press GENTER again. 1)MEMORY LOAD a)MEMORY1 b)MEMORY2 c)MEMORY3 p p p p [ENTER]:Enter y • If system settings are already stored in the selected memory number, this unit overwrites the old settings. p p [ ]/[ ]:Up/Down [ENTER]:Enter SETTINGS APPENDIX 19 En