Yamaha YSP-5100BL Owners Manual - Page 21

INTRODUCTION PREPARATION PLAYBACK FEATURES PLAYBACK FEATURES Playback Playing back sources This section describes how to playback source input from your external components. For details on your external components, refer to the owner's manual supplied with each component. 1 Press CPower (p) key to turn on this unit. 2 Turn on external components (TV, Blu-ray disc player, etc.) connected to this unit. 3 Press one of the DInput selector keys to select an external component as an input source. Input source name HDMI1 y • You can change the input source name displayed on the front panel display (page 38). 4 Start playback of the external component that you have selected as the input source, or select a radio station on the tuner. • FM tuning (page 25) • Playing back iPod/iPhone (page 30) 5 Press KVOLUME +/- to adjust the volume. Volume Volume 40 6 Press CPower (p) key to turn this unit to the standby mode. Playing back TV sounds 1 Select the desired TV channel. 2 Press DTV to select the TV as the input source. 3 Mute the sound output on the TV. Playing back a player 1 Select the player as the video input on the TV. 2 Press DHDMI1-4 or DAUX1/2 to select the player as the input source. For example, if the player is connected to the HDMI IN 1 jack of this unit, press DHDMI1. 3 Start playback of the player. 4 Mute the sound output on the TV. y • If your player supports the HD audio, check whether the audio output setting on the player is set to the value which supports HD audio output ("Auto", "Bitstream", etc.). • If your player does not support the HD audio, check whether the audio output setting on the player is set to multi-channel linear PCM. • If your player is connected to this unit through the digital connection, check whether the audio output setting on the player is set to digital output ("Bitstream", "Dolby Digital", "DTS", etc.). • To enhance the surround sound effect, set the audio setting of your player to the multi-channel audio mode. • You can use the supplied demonstration DVD to check the digital signals being input from the player through the digital connection (HDMI, optical or coaxial). The DIGITAL indicator lights up when this unit detects the digital audio signal input. Muting audio output 1 Press KMUTE to mute the audio output. 2 Press KMUTE again to resume audio output. Decoder and input channel indicators ■ Decoder indicators Depending on the input source and the selected decoder, the indicators in the front panel display light up as follows: Changing OSD language AUTO SETUP (IntelliBeam) Using the system memory Playback Playback mode FM tuning SIRIUS Satellite Radio™ tuning Playing back iPod™ Useful features SETTINGS APPENDIX 21 En