Yamaha YSP 900 Owner's Manual - Page 46

ENJOYING SURROUND SOUND ■ Decoder indicators Depending on the input source and the selected surround mode, the indicators in the front panel display light up as follows: Status When PCM signals are being input When DTS digital signals are being input or when DTS Neo:6 is selected When Dolby Digital signals are being input Indicator PCM DIGITAL When Dolby Pro Logic is selected PL When Dolby Pro Logic II is selected PL y • You can select an input mode (AUTO, DTS or ANALOG) by pressing INPUTMODE on the remote control repeatedly (see page 71). • Discs encoded in DTS-ES or Dolby Digital 5.1 EX will be played back in DTS or Dolby Digital. ■ Surround modes and recommended sources Surround mode Dolby Pro Logic Dolby Pro Logic II DTS Neo:6 - Movie Music Game Cinema Music Recommended source All sources Movies Music Games Movies Music Notes • Surround modes are available when the beam mode is set to a setting other than the stereo playback or the my beam as the beam mode. • When you select an input source (see page 37), the surround mode used for the previously selected input source is selected. • If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is selected. • The surround modes are available only when the CINEMA DSP programs are turned off (see page 51) or when the movie program is selected as the CINEMA DSP program (see page 50). • Only Dolby Pro Logic, Dolby Pro Logic II Movie and DTS Neo:6 Cinema are available when the movie program is selected as the CINEMA DSP program (see page 50). • If the surround modes are not available, "Prohibit" appears in the front panel display when you press SURROUND on the remote control. • The surround modes are available only when 2-channel signals are being input. If you try to switch between the surround modes when 5.1 channel signals are being input, "Prohibit" appears in the front panel display. 42 En