Yamaha YSP 900 Owner's Manual - Page 51
PLAYING BACK SOUND CLEARLY (My beam), Using auto-adjust function
UPC - 027108928302
View all Yamaha YSP 900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
PLAYING BACK SOUND CLEARLY (MY BEAM) PLAYING BACK SOUND CLEARLY (My beam) You can improve listenability in a noisy environment by changing the beam mode to the my beam, outputs sound beams directly to the listening position in a single channel. In addition, the my beam is also ideal if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night. My beam microphone STANDBY/ON POWER POWER AV TV 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH LEVEL MENU TEST ENTER TV/AV YSP RETURN Note If the my beam is selected as the beam mode, the surround modes (see page 42), the CINEMA DSP programs (see page 49) and the TruBass (see page 54) become ineffective. In addition, no audio is output from the subwoofer connected to this unit. Using auto-adjust function The my beam microphone on the remote control collects the test tones from this unit, and then the beam angle is automatically adjusted. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press and hold MY BEAM on the remote control more than 2 seconds. A test tone is output twice from this unit. Keep pointing the remote control toward this unit during the test tones are being output so that the my beam microphone can collect the test tones. Control range: L50° to R50° Operation guarantee range: 6 m (20 ft), L30° to R30° MY BEAM 5 Notes • If an error occurs, an error buzzer is played and MY BEAM ERROR is displayed on the front panel display. • An error may occur if the listening room is noisy. Make sure that the listening room is as quiet as possible during the test tones are being output. • Do not shake or move the remote control during the test tones are being output. • Do not cover the my beam microphone on the remote control during the test tones are being output. • The batteries in the remote control may be week if the remote control does not function properly. In such case, replace all the batteries and then try the procedure again. BASIC OPERATION English 47 En