Yamaha YSP 900 Owner's Manual - Page 69

p p INPUT MENU Use to manually adjust various parameters related to the audio and video input. SET MENU → MANUAL SETUP → INPUT MENU 3 INPUT MENU . A)INPUT ASSIGNMENT B)INPUT MODE C)INPUT TRIM D)INPUT RENAME [ ]/[ ]:Up/Down [ENTER]:Enter MANUAL SETUP ■ INPUT MODE (Input mode) Use to designate the input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. For information on the types of audio signals that can be output by this unit, see "Surround modes and recommended sources" on page 42. Choices: AUTO, LAST B)INPUT MODE AUTO LAST p [ ]/[ ]:Select [ENTER]:Return p p p p p ■ INPUT ASSIGNMENT (Input assignment) Use to assign the optical and coaxial digital input jacks of this unit to other components if the initial settings of this unit do not correspond to your needs. By assigning other components to the input jacks on this unit, you can display the name of the connected component in the front panel display and OSD, and operate the component with the input selector button of the same name. If you connect a component to the input jacks of this unit and do not assign it, the default component name for that input jack is displayed in the front panel and OSD when selected. • Select OPTICAL IN (1) to assign components to the TV OPTICAL IN jack of this unit. Choices: TV, VCR • Select OPTICAL IN (2) to assign components to the AUX OPTICAL IN jack of this unit. Choices: AUX, DVD p p • Select AUTO to allow this unit to automatically detect the type of input signal and select the appropriate input mode. • Select LAST to set this unit to automatically select the last input mode used for that input source. If the type of input signal is different from the setting, no sounds will be produced. ■ INPUT TRIM (Input trim) Use to adjust the input level of the input source. C)INPUT TRIM . TV ANALOG;;;-3.0dB OPTICAL;;-3.0dB VCR ANALOG;;;-3.0dB AUX COAXIAL;;-3.0dB DVD COAXIAL;;-3.0dB p [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return p p p p A)INPUT ASSIGNMENT 1/2 OPTICAL IN . (1);;;;; TV ( TV ) (2);;;;; AUX ( AUX ) p [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return • Select COAXIAL IN to assign components to the COAXIAL IN jack of this unit. Choices: DVD, AUX A)INPUT ASSIGNMENT 2/2 COAXIAL IN . (3);;;;; DVD ( DVD ) p [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return • Select TV ANALOG to adjust the level of audio and video signals input at the TV/STB analog audio input jacks of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB • Select TV OPTICAL to adjust the level of audio and video signals input at the TV OPTICAL IN jack of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB • Select VCR ANALOG to adjust the level of audio and video signals input at the VCR analog audio input jacks of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB • Select AUX OPTICAL to adjust the level of audio and video signals input at the AUX OPTICAL IN jack of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB • Select DVD COAXIAL to adjust the level of audio and video signals input at the COAXIAL IN jack of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB ADVANCED OPERATION English 65 En