Yamaha YSP 900 Owner's Manual - Page 49

Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH LEVEL MENU TEST ENTER TV/AV YSP RETURN 1 Repeat steps 1 and 2 in "Enjoying 2-channel sources in surround sound" on page 43 and select PL II Music or Neo:6 Music. 2 Press / to select the parameter. ENTER ENJOYING SURROUND SOUND ■ When Dolby Pro Logic II Music is selected PANORAMA Gives front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION Adjusts the difference in volume between front and surround channels to the volume balance you desire. Control range: -3 (toward the surround direction) to +3 (toward the front direction) Default setting: STD CT WIDTH Distributes the center channel sound to the left and right. If set to 0, center channel sounds output only from the center channel. Control range: 0 to 7 Default setting: 3 ■ When DTS Neo:6 Music is selected C. IMAGE Adjusts the center image from three channels (front and center) to varying degrees. Control range: 0.0 (wider) to 1.0 (toward the center) Default setting: 0.3 3 Press / to configure the parameter. ENTER BASIC OPERATION English 45 En