Zenith H20H52DT Operating Guide - Page 31

Installer Menus Use the Installer's Menus to make TV operation adjustments. Accessing the Installer's Menu Installer's menus can be accessed by using the optional installer's remote control. Just press and hold MENU (about 8 seconds) until the display changes, then press 9, 8, 7, 6, then ENTER. To exit the Installer's Menu, press ENTER again. Changes you make will be stored in nonvolatile memory. The Installer's Menu opens with item 00-I, INST. SEQ. Use the SELECT key to sequence through the available menu items. Or, access an item directly by entering the line number, then pressing MENU. For example, to access the Start Channel option which is on line 11, press 11, then MENU. To change a current setting use the Left/Right ADJ keys. OIMCRMIO62A 01.48 01 00-I. INST . SEQ. 0 SN:XXXX-XXXXXXXX UPN:XXX-XXX-XXX-XXX XX/XX/XX TE = 10110000 Using the Installer's Menu Items 00-90 are immediately accessible only upon entering the Installer's Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on-site are given below. A second section of the Installer's Menu that is intended for qualified service technicians only is not shown (XX-F Items). Normally these items do not require adjustment. XX-F Menu Items (Not shown here) are service-type adjustments and only qualified technicians having specialized test equipment should access them. Items in the Installer's Menu: 0-I to 25-I Menu Item Function Value Range Default Value 0-I. INSTALLER. SEQ 0 - 3 0 1-I. 2-I. 3-I. 4-I. 5-I. 6-I. 7-I. 8-I. 9-I. 10-I. 11-I. 12-I. 13-I. 14-I. 15-I. 16-I. 17-I. 18-I. 19-I. 20-I. 21-I. 22-I. 23-I. 24-I. 25-I. POWER MANAGE AC ON BAND/AFC STRT CHANNEL CHAN LOCK GHOST CH START VOLUME MIN VOLUME MAX VOLUME MUTE DISABLE KEY DEFEAT IR BANKS EN. SCAN MODE STRT CH IN SM SLEEP TIMER EN. TIMER ALARM RADIO NOT USED FEATURE LEVEL V-CHIP MAX BLK HRS CAPTION LOCK TEXT MODE FUNCTION PRE.0 0 - 7 0 / 1 0 - 7 0 - 255 0 / 1 0 / 1 0 - 63, 255 0 - 63 0 - 63 0 / 1 0 / 1 0 / 1 0 - 3 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 0 - 99 0 / 1 0 / 1 0 - 3 0 0 0 255 0 0 255 0 63 0 1 0 1 0 1 1 1 1 1 Zen 1 1 12 0 1 0 Brief Description of Function and Comments Changes installer Entry Sequece. Leave default set 0 0 ( 9876), 1 (4321), 2 (1478), 3 (3698) Sets number of hours of no activity before auto shutoff. Set to 1 to enable auto turn on at power up. Tuning band, see detailed descriptions. Channel at turn-on (255 last Ch). When set to 1, cannot tune from current channel. Set to 1 to enable Ghost Channel display. Volume level at TV turn-on (Set 255 to r etain last volume level). Minimum volume setting. Maximum volume setting. Set to 1 to disable m ute function. Set to 1 to disable M enu, Select, and Adj keys on front panel. Set to 1: enables TV to respond to IR codes to change Channel Bank directly. Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequen ce. Set to 1 to put TV on/o ff below start channel number. Set to 1 to enable Sleep Timer. Set to 1 to enable Timer. Set to 1 to enable Alarm. Set to 1 for TVs with Radio. Leave default set 1 (1 Zen 1) Set to 1 to enable V-Chip Select number of Parental Control blocking hours. Set to 1 to retain caption setting at turn off. Set to 1 to add Text option to closed caption menu. Controls channel preview in Pay-Per-View function menu. Page 31