Zenith H20H52DT Operating Guide - Page 35
Installer Menu Items 14-I through 27-I: Detailed Descriptions.
View all Zenith H20H52DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installer Menus Installer Menu Items 14-I through 27-I: Detailed Descriptions. Scan mode Characteristics 0 Channel up/down keys change channels only. 1 Channel down below the lowest channel (or channel up higher than the highest) and TV turns off. 2 Channel down below the lowest channel (or up higher than the highest) and TV goes to FM radio. Channel down below lowest FM station (or Channel up higher than the highest) and TV channels return. Channel down below the lowest channel (or up higher than the highest) and TV goes to 3 FM radio. Press channel down below lowest FM station (or Channel up higher than the highest) and TV turns off. 14-I. STRT CH IN SM When set to 1, installs TV on/off event below the start channel at TV turn on. 15-I. SLEEP TIMER When set to 1, the SLEEP TIMER feature may be used (but no message is displayed prior to turnoff). When set to 0, the sleep timer is not available. 16-I. EN. TIMER Set to 1, timer function is available to user. Set to 0 to disable timer functions. (Clock must be set in order to use Timers.) 17-I. ALARM Gives you the option of making the alarm function available to the user. Set to 1, alarm function is available to user. Set to 0 to disable the Alarm function. Note: Clock must be set in order to set the Alarm. 18-I. RADIO Set to 1, for TVs with a Radio. Set to 0 to disable the Radio function, for TVs without a Radio. 19-I. NOT USED 20-I. FEATURE LEVEL Default set to ZEN 1 for Zenith IR remote control operation. Set O, P LBL for Zenith Private Label IR remote control operation. Warning: Do not set to "0" or remote will not control TV. Installer should leave item 20 FEATURE LEVEL set to 1 (default). 21-I. V-CHIP Set to 1 to activate V-Chip (Parental Control); have it available to user to filter, control, or restrict programming content. Set to 0 to turn V-Chip feature off, not available to user; no programming restrictions can be set. 22-I. MAX BLK HRS Set to 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default is 12 blocking hours. 23-I. CAPTION LOCK Set to 1 to restore previous caption On/Off state after TV turns off. When set to 0, captions are always off, when TV is initially turned on. 24-I. TEXT MODE Determines whether TEXT 1, TEXT 2, TEXT 3, or TEXT 4 decoding is enabled when TEXT is turned on (either from the Setup Menu or directly with CC on the remote). TIP: Set Text Mode to 1 only if text is offered in your video System. 25-I. FUNCTION PRE. Set to 0 to suppress CHANNEL PREVIEW from the FUNCTION menu with some Pay-Per-View systems. 26-I. 6 KEY SYS Set to 1 for 6-key front control panels. Set to 0 for 10-key front control panels. Leave default set to 1. 27-I. HOSPITAL MODE The default is 2 (which favors most hospitals). With this setting two things are affected: Channel Banks 1, 2, and 3 are accessible, while Bank 4 is inactive. Hosp. Mode=0 Not hospital mode. IR code depends on Item 20-I. "Inactive TV" features not available. Hosp. Mode= 1 Zenith P.L. IR Code (Bed 1) Hosp. Mode= 2 Zenith IR Code (Bed 2) Page 35