Zenith XBR413 Operating Guide - Page 19

Before Operation (Continued) DVR HOOKUP To Add or Erase Channels from Memory This feature allows you to add to or erase channels from memory manually. 1 Follow steps 1-3 as shown above to the previous page (Auto Channel Set). 2 Use v / V to select the CH. Add/Del option. 3 Press B to move to the third level. Edit icon is highlighted. 4 Press ENTER. The Channel Edit menu appears. Ch. 2 Add Delete 0-9 Input Return 5 Use v / V or number buttons to select a channel to add or delete then press ENTER. Add or Delete icon is highlighted. 6 Press ENTER to confirm your setting. 7 Repeat steps 5-6 to add or erase additional channels. Auto Clock Set The VCR/DVD Recorder gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock Feature enables the VCR/DVD Recorder to set up the clock when the VCR/DVD Recorder is turned off. The Clock Set feature is set to Auto at the factory. In the "Auto" setting, the VCR/DVD Recorder looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. 5 Press B to move to the third level. 6 Use v / V to select the Auto option then press ENTER. The Auto option is set at the factory. In the Auto option, the VCR/DVD Recorder looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. 7 Use v / V to choose your Time Zone. You can set your local Time Zone manually. When Timezone is set to Auto, the VCR/DVD Recorder will use XDS information to determine the proper setting. 8 Use B to choose the Daylight Savings option. Use v / V to choose Auto, On, or Off. You can turn Daylight Savings On or Off manually. When it is set to Auto, the VCR/DVD Recorder will use XDS information to determine the proper setting. 9 Press ENTER to confirm your setting, then press SETUP to exit the Setup menu. ote If your local TV station does not send date and time information, or sends incorrect information, you can set the clock manually. Manual Clock Set 1 Follow steps 1-5 as shown above to the left (Auto Clock Set). 2 Use v / V to select the Manual option then press ENTER. Tuning Band Auto Channel Set CH. Add/Del Clock TV Aspect Ratio Progressive Scan Factory Setting Auto Manual Year 2003 Date 1 / 1 Time 12 : 00 AM Select Tuning Band Auto Channel Set CH. Add/Del Clock TV Aspect Ratio Progressive Scan Factory Setting Auto Manual Time Zone Daylight Savings Auto Auto Prev. Select 3 Enter the necessary information for date and time. b / B (left/right): Moves the cursor to the previous or next column. v / V (up/down): Changes the setting at the current cursor position. 4 Press ENTER to confirm your setting, then press SETUP to exit the Setup menu. 1 Press SETUP. The Setup menu appears. 2 Use v / V to select the GENERAL menu. 3 While the GENERAL menu is selected, press B to move to the second level. 4 Use v / V to select the Clock option. 19