Zenith XBR413 Operating Guide - Page 20

Before Operation (Continued) TV Aspect Ratio 4:3 Letter Box: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Pan Scan: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 16:9 Wide: Select when a 16:9 wide TV is connected. Tuning Band Auto Channel Set CH. Add/Del Clock TV Aspect Ratio Progressive Scan Factory Setting 4:3 Letter Box 4:3 Pan Scan 16:9 Wide Prev. Select Factory Setting If you wish, you can reset the VCR/DVD Recorder to its original factory settings. Select "SET" then press ENTER. The Initialize menu will appear. Use the b B buttons to select "Yes" and press ENTER. ote Some options cannot be reset. (Movie Rating, Password and Country Code) Tuning Band Auto Channel Set CH. Add/Del Clock TV Aspect Ratio Progressive Scan Factory Setting SET Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. • If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting the VCR/DVD Recorder to a standard (analog) television, set Progressive Scan to OFF. • If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to ON. Tuning Band Auto Channel Set CH. Add/Del Clock TV Aspect Ratio Progressive Scan OFF Factory Setting ON Prev. Select LANGUAGE Display Menu Select a language for the Setup menu and on-screen display. Display Menu DISC Menu DISC Audio DISC Subtitle English Prev. Select Prev. Select Caution Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to ON in error, you must reset the VCR/DVD Recorder. First, remove the disc in the VCR/DVD Recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. Disc Language Select a language for the disc's Menu, Audio, and Subtitle. Original : The original language set for the disc is selected. Other : To select another language, select Other option then press ENTER. Use the numbered buttons to key-in the corresponding 4-digit number according to the language code list on page 53. If you enter the wrong number, press b repeatedly to delete one by one and correct it. Display Menu DISC Menu DISC Audio DISC Subtitle Original English French Spanish Italian Japanese Chinese Other - - - - Prev. Select 20