Zenith XBR413 Operating Guide - Page 32

Operation with DVD (Continued) Playing a DVD (continued) Time Search DVD Video VR - : -- : -- The Time Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLAY twice during playback. The on-screen display appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 7 seconds, use v / V to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. 3 Within 7 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. You can not enter an invalid time. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then reenter the correct numbers. 4 Within 7 seconds, press ENTER to confirm the start time. Playback starts from the selected time on the disc. Zoom DVD Video VR The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to activate the Zoom function. The square frame will be displayed in the right bottom of the picture. If no button is pressed for more than 5 seconds, the square frame will disappear. Each press of the ZOOM button changes the TV screen in the sequence shown below. X1(normal size) → X2 size → X4 size → X1(normal size) 2 Use the b B v V buttons to move through the zoomed picture. 3 To resume normal playback, press CLEAR or press ZOOM repeatedly until the normal picture appears. ote The zoom function may not work for some DVDs. Marker Search DVD Video VR MAKER 1 / 6 You can start playback from a memorized point. Up to six points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARKER when playback reaches the spot that you want to memorize. The Marker icon will appear on the TV screen briefly. 2 Repeat step 1 to enter up to six Marker points on a disc. To Recall a Marked Scene 1 During disc playback, press SEARCH. The Marker Search menu will appear on the TV screen. Marker Search Move Select CLEAR Delete Close 2 Use the b B v V buttons to select a Marked scene that you want to recall. 3 Press ENTER. Playback will start from the Marked scene. 4 To exit the Marker Search menu, press RETURN(O) To clear a Marked Scene 1 During disc playback, press SEARCH. The Marker Search menu will appear on the TV screen. 2 Use b B v V to select the Marked scene that you want to erase. 3 Press CLEAR. "Delete selected marker. Continue?" message appears. 4 Use b / B to select "Yes" then press ENTER. 5 Repeat steps 2-4 to erase additional Marked scene. 6 To remove the Marker Search menu, press RETURN (O). Disc Menus DVD Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press DISC MENU. Then use the 0-9 buttons to directly select the desired option, or use the b B v V buttons to highlight your selection and press ENTER. 1 Press DISC MENU. The Disc menu is displayed. 2 To exit the Disc menu, press STOP (x). Title Menus DVD 1 Press TITLE. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, the Disc menu may appear. 2 The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chapters for the title. 32