ZyXEL LTE7485-S905 User Guide - Page 101
Policy Route
View all ZyXEL LTE7485-S905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 8 Routing Figure 76 Network Setting > Routing > DNS Route > Add New DNS Route The following table describes the labels in this screen. Table 29 Network Setting > Routing > DNS Route > Add New DNS Route LABEL DESCRIPTION Active Enable DNS route in your Zyxel Device. Domain Name Enter the domain name you want to resolve. You can use the wildcard character, an "*" (asterisk) as the left most part of a domain name, such as *.example.com. The Zyxel Device forwards DNS queries for any domain name ending in example.com to the WAN interface specified in this route. Subnet Mask Type the subnet mask of the network for which to use the DNS route in dotted decimal notation, for example 255.255.255.255. WAN Interface OK Select a WAN interface through which the matched DNS query is sent. You must have the WAN interface(s) already configured in the Broadband screen. Click this to save your changes. Cancel Click this to exit this screen without saving. 8.4 Policy Route By default, the Zyxel Device routes packets based on the shortest path to the destination address. Policy routes allow you to override the default behavior and route packets based on other criteria, such as the source address. For example, you can use policy-based routing to direct traffic from specific users through specific connections or distribute traffic across multiple paths for load sharing. Policy-based routing is applied to outgoing packets before the default routing rules are applied. LTE Series User's Guide 101