ZyXEL LTE7485-S905 User Guide - Page 46
Con Static Route for Routing to Another Network
View all ZyXEL LTE7485-S905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 4 Tutorials 4.10 Configure Static Route for Routing to Another Network In order to extend your Intranet and control traffic flowing directions, you may connect a router to the Zyxel Device's LAN. The router may be used to separate two area networks. This tutorial shows how to configure a static routing rule for two network routings. In the following figure, router R is connected to the Zyxel Device's LAN. R connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the Zyxel Device's WAN default gateway by default. In this case, B will never receive the traffic. LTE Series User's Guide 46
Chapter 4 Tutorials
LTE Series User’s Guide
46
4.10
Configure Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the
Zyxel Device’s LAN. The router may be used to separate two area networks. This tutorial shows how to
configure a static routing rule for two network routings.
In the following figure, router
R
is connected to the Zyxel Device’s LAN.
R
connects to two networks,
N1
(192.168.1.x/24) and
N2
(192.168.10.x/24). If you want to send traffic from computer
A
(in
N1
network) to
computer
B
(in
N2
network), the traffic is sent to the Zyxel Device’s WAN default gateway by default. In
this case,
B
will never receive the traffic.